Panasonic TX-40EXW735, Operating Instructions Manual

Page: 29 / 84

English
29
Child Lock
You can lock specific channels / AV input terminals to
restrict access to them.
When the locked channel / input is selected, a message
appears. Enter the PIN number to watch.
For details, refer to [eHELP] (Search by Purpose >
Functions > Child Lock).
1
Display the menu and select [Setup]
Setup
select
access
2
Select [Child Lock]
select
access
1
Enter the PIN number (4 digits)
Enter the PIN number twice at first setting.
Make a note of the PIN number in case you forget
it.
“0000” may be stored as the default PIN number
depending on the country you select.
2
Select [Child Lock List] and set the channel / input to
be locked
101 BBC 1 Wales
7 BBC THREE
14 E4C
VCR
1 BBC1
***** 2
HDMI1 AV
Child Lock List - TV and AV Sorting 123...
Name Input
DVB-C
DVB-T
DVB-T
Analogue
Analogue
Analogue
External Type
Free TV
Free TV
Free TV
Analogue
Analogue
Analogue Lock
select
lock / unlock
: Appears when the channel / input is locked
To lock all
(green)
To cancel all locks
(yellow)
To sort channel names in alphabetical order
(red)
To jump to the head of the next channel / input group
(blue)
Watching External
Inputs
Connect the external equipment (VCR, DVD, etc.) and
you can watch through the input.
For details, refer to [eHELP] (Search by Purpose >
Watching > External equipment).
1
Display the input selection menu
2
Select the input mode connected to
the equipment
select
watch
You can also select the input pressing the AV button.
Press repeatedly until the desired input is selected.
You can select [COMPONENT] and [VIDEO] in [AV].
Operating the equipment with TV’s
remote control
You can operate the content in Media Player / media
server, recording functions or the connected equipment
with the following buttons of this TV’s remote control.
How to change the code
Each Panasonic product has its own remote control
code. Change the code according to the product for
operation.
Press and hold Standby On / Off switch
during the following operations
Enter the appropriate code,
see table below
Change