Panasonic TX-40EX700B, E-Manual

Page: 173 / 318

Network settings
Network Connection
Ensure the connections are completed before starting network setup.
Network > Network connections
■
Quick setup - Wireless
1. Display the menu with MENU .
2. Select Network > Network Connection and press OK to access.
●
Confirm the encryption key, settings and position of your access point
before starting setup. For details, read the manual of the access point.
3. Select Quick setup and press OK to access.
●
When the LAN cable is connected, wired setup will be done
automatically.
4. Select your desired access point and press OK to access.
●
Available Wireless Networks are displayed automatically.
: Encrypted access point
●
For WPS(Push button)
1) Select
Easy setup with Push button and press OK to access.
2) Press the WPS button on the access point until the light flashes.
3) Connect the TV with the access point with
OK .
– WPS: Wi-Fi Protected Setup™
– If the connection fails, check the settings and positions of your
access point. And then, follow the on-screen instructions.
●
It is recommended to select the encrypted access point.
5. Enter the encryption key of the access point and press OK to set.
●
You can set characters using Numeric buttons .
●
Press BACK/RETURN to store.
6. Automatically setup is done and Network Status is displayed.
Network > Network settings > Network Status
7. Select Exit and press OK to set.
●
To set manually
Network > Network settings > Custom - Wireless
- 173 -