Panasonic TX-40EX700B, E-Manual

Page: 117 / 318

Recording
USB HDD setup
Preparations
You can record the digital TV programmes to the connected USB HDD and
enjoy playing back in various ways.
●
Prepare the USB HDD for the exclusive use of recording with this TV.
●
Depending on the model, it may be necessary to remove the terminal
cover / cable cover before connecting or disconnecting cables.
●
Connect the USB HDD to the USB 1 or USB 2 port with the USB cable.
(Refer to the terminal indication of TV set.)
●
Be sure to connect the USB HDD to the mains socket.
●
To remove the USB HDD safely from the TV, perform Safely remove USB
in USB Device Setup .
Recording > USB HDD setup > Setting for USB HDD
●
Check the terminal type and cable plugs are correct for connection.
USB port
USB cable
USB HDD
Mains socket
= Caution =
●
All data in the USB HDD will be erased in the following cases:
– When formatting the USB HDD with this TV
Recording > USB HDD setup > Setting for USB HDD
– When formatting the USB HDD to use on PC, etc.
●
When the TV is repaired due to a malfunction, you may have to format
the USB HDD again with this TV to use it. (All data will be erased after
formatting.)
- 117 -