Panasonic TX-40DX700B, Ehelp

Page: 202 / 362

Custom - Wireless Access Point
You can use the TV as a wireless access point and connect the network
equipment without an access point.
●
Confirm the PIN code, network settings of the equipment before starting
setup. For details, read the manual of the equipment.
1. Display the menu with MENU .
2. Select Network > Network Connection > Custom > Wireless Access Point
and press OK to access.
3. Select Connect to device in WPS and press OK to access.
●
To set manually, select Change settings (see below).
4. Select and set WPS(Push button) / WPS(PIN) and press OK to access.
WPS(Push button) :
Set up the equipment for WPS(Push button) . For details, read the
manual of the equipment.
WPS(PIN) :
Enter the PIN code of the equipment.
●
If the connection fails, check the settings and positions of the
equipment. And then, follow the on-screen instructions.
■
Change settings
You can set up Network Name(SSID) , Encryption key , Wireless type and
Channel setting method manually.
Follow the on-screen instructions and set manually.
●
Set Reset settings to reset the items for Change settings .
= Note =
●
You cannot connect the internet service while the TV is set to Wireless
Access Point .
●
You can connect up to 7 devices. But the transfer rate varies according to
communication environment or the numbers of connected equipment.
●
To confirm the current network settings
Network > Network settings > Network Status
●
Ensure the equipment to connect supports WPS for this setup.
●
WPS: Wi-Fi Protected Setup™
- 202 -