background image

5

 Notes

 Maintenance

Mains plug

Wipe the mains plug with a dry cloth at regular intervals. (Moisture and dust may lead to  re or electrical shock.)

First, remove the mains plug from the socket outlet.

Display panel

Regular care: Gently wipe the surface clean of dirt by using a soft cloth.
Major contamination: Wipe the surface clean using a soft cloth dampened with clean water or diluted neutral detergent 
(1 part detergent to 100 parts water). Then, using a soft dry cloth, evenly wipe the surface clean until it is dry.

Caution

• 

The surface of the display panel has been specially treated and may be easily damaged.
Do not tap or scratch the surface with your  ngernail or other hard object.

• 

Take care not to subject the surface to insect repellent, solvent, thinner, or other volatile substances
(this may degrade surface quality).

Cabinet, Pedestal

Regular care: Wipe the surface clean using a soft dry cloth.
Major contamination: Dampen a soft cloth with clean water or water containing a small amount of neutral detergent. 
Then, wring the cloth and wipe the surface clean with it. Finally, wipe the surface clean with a dry cloth.

Caution

• 

Take care not to subject the TV's surfaces to detergent.
(A liquid inside the TV could lead to product failure.)

• 

Take care not to subject surfaces to insect repellent, solvent, thinner, or other volatile substances
(this may deteriorate the surface by peeling the paint).

• 

Do not allow the cabinet and pedestal to make contact with a rubber or PVC substance for a long time.

 Notes / 

Maintenance

• 

Safety Precautions

Caution

  

When cleaning the TV, remove the 
mains plug

• 

Cleaning an energized TV may cause 
electrical shock.

  

When the TV is not going to be used for a 
long period of time, remove the mains plug

• 

This TV will still consume some power even in 
the Off mode, as long as the mains plug is still 
connected to a live socket outlet.

  

Allow suf cient space around the 
TV for radiated heat

10

10

10

10

(cm)

Minimum distance

• 

When using the pedestal, keep the space 
between the bottom of the TV and the  oor 
surface.

• 

In case of using Wall-hanging bracket, follow 
the manual of it.

  

Do not block the rear air vents

• 

Blocked ventilation by newspapers, table cloths, 
curtains, etc. may cause overheating,  re or electrical 
shock.

  

Do not expose your ears to excessive 
volume from the headphones

• 

Irreversible damage can be caused. 

  

Auto power standby function

• 

If no signal is received and no operation is performed 
in Analogue TV mode for 30 minutes, the TV will 
automatically go to standby mode.

  

Keep the TV away from these types of equipment

• 

Electronic equipment

  In particular, do not place video equipment near the TV 

(electromagnetic interference may distort images / sound).

• 

Equipment with an infrared sensor

  This TV also emits infrared rays (this may affect 

operation of other equipment).

  

Transport only in upright position

Summary of Contents for TX-37LZ8P

















Reviews:

Related manuals for TX-37LZ8P