Panasonic TX-32PD30D, Service Manual

Page: 6 / 56

ALIGNMENT SETTINGS
(The figures below are nominal and used for representative purposes only.)
1. Set the Bass to maximum position, set the Treble to minimum position, press the down button
(- / v) on the customer
controls at the front of the TV and at the same time press the INDEX button on the remote control, this will place the TV
into the Service Mode.
2. Press the RED / GREEN buttons to step up / down through the functions.
3. Press the YELLOW / BLUE buttons to alter the function values.
4. Press the STR button after each adjustment has been made to store the required values.
5. To exit the Service Mode, press the "N" button.
Alignment Function Settings / Special features
Horizontal Position
H – Pos
456
Optimum setting.
Vertical Position
V – Pos
108
Optimum setting.
Horizontal Amplitude
H – Amp
45
Optimum setting.
Vertical Amplitude
V – Amp
45
Optimum setting.
Parabola
Parabola
95
Optimum setting.
Trapezoid
Trapezoid
129
Optimum setting.
Horizontal Parallel
H – Parallel
9
Optimum setting.
Vertical Linearity
V – Linear
164
Optimum setting.
Top Corner
Top – Corner
175
Optimum setting.
Bottom Corner
Bottom – Corner
165
Optimum setting.
Vertical Symmetry Correction
V – S – Correct
76
Optimum setting.
Center Correction
C – Correct
7
Optimum setting.
DAF - Phase
H - DAF – Phase
43
Optimum setting.
Highlight
Lowlight
High 0145 0128 0130
Low 0492 0512 0348
Optimum setting.
Sub-Brightness
Sub-Brightness
130
Optimum setting.
Video Gain 2
Video Gain 2
22
Optimum setting.
Splitter Gain (Tuner)
SPL. Gain
0
Optimum setting.
Sub-Geomagnetic
Sub- Geomagnetic
16
Optimum setting.
6