25
Press the
SOUND
menu button
Move to
Surround menu
option
Access
Surround menu
Move to chosen menu option
Adjust chosen option or access chosen menu
Press the
TV/AV
button at any time to go back to watching TV
If a DTS / Dolby Digital input is detected the
Surround
menu
options instantly change ---
Surround mode
is
not available. Ensure that the
Digital Audio
option in the
SOUND
menu is set to the correct AV input (see page
9 for details). A message displayed in the centre of the
screen shows whether the signal is DTS or Dolby Digital,
and gives a code indicating which channels are
detected (see table to the right). Subwoofer output is not
listed; if a subwoofer channel is detected then its
contents are output, (the subwoofer output level can be
adjusted or the subwoofer turned off via the subwoofer
option in the SOUND menu --- see page 9 for details).
The volume adjustment sets the overall
Surround output volume.
When a DTS / Dolby Digital input is not
detected this option is shown. Choose
between
Pro Logic
and
Simulated
. The
mode chosen here dictates the next menu
option.
If a DTS / Dolby Digital input is detected, or if
Pro Logic
is selected in
Surround mode
, this
menu option is
Speaker setting,
allowing
selection of
Normal
,
Phantom
or
3 Stereo
modes, as described on page 26.
If
Simulated
is selected in
Surround mode
,
this menu option is
Simulated setting
,
allowing selection of
Disco
,
Movie
or
Stadium
modes, as described on page 26.
Allows adjustment of the volume for each
speaker, as described on page 26.
Allows setting of the distance from the
listening position to the front speakers.
Allows setting of the distance from the
listening position to the rear speakers. If the
rear surround speakers are closer to you than
the centre speaker, you may hear dialogue
“leakage” from the rear surround speakers. It
may be necessary to reduce the volume of the
rear speakers.
If you do not have an external centre speaker
connected, set to
On.
If you wish to connect
an external centre speaker then switch
Off
,
see page 30 for connection details.
Surround menu
If no DTS / Dolby Digital input is detected,
Surround
mode
appears as a menu option.
If a DTS / Dolby Digital input is detected, the
Surround menu
is as shown above (no
Surround
mode
available).
TV/AV
SOUND
Code
Front outputs
Rear surround outputs
Left
Right
Centre
Left
Right
1+1
Dual mono output
1/0
Mono output
2/0
n
n
3/0
n
n
n
2/1
n
n
Mono output
3/1
n
n
n
Mono output
2/2
n
n
n
n
3/2
n
n
n
n
n
Surround mode
Speaker setting /
Simulated setting
Volume
Speaker level
Rear distance
Front distance
Internal speaker
