Panasonic TX-32LXD500, Service Manual

Page: 16 / 121

7.8. Removing the DG-Board
1. Remove the rear AV bracket (See 7.4.) and the rear metal
frame. (See 7.5.)
2. Remove the XV-Board unit. (See 7.7.) (for LXD500 model
only)
3. Disconnect the couplers (DG6, DG8 and DG7), the flexible
cables (DG2 and DG3) and the bridge cables (DG4 and
DG5).
4. Remove the fixing screws (7pcs).
5. Remove the DG-Board with DV-Board.
7.9. Removing the DV-Board
1. Remove the DG-Board with DV-Board. (See 7.8.)
(See above figure in item 7.8.)
2. Remove a fixing screw ( ) (reverse side) and remove the
copper foil sheet carefully not to brake.
3. Disconnect the coupler (DV15-DG10) and remove the DV-
Board.
7.10. Removing the AP-Board
1. Remove the rear AV bracket ass´y (See 7.4.) and the rear
metal frame. (See 7.5.)
2. Disconnect the couplers (AP2, AP6 and AP10 (AC Cord))
and the bridge cables (H1 (AP1) on the H-Board, P3/CN201
(AP3) on the P-Board and DG4 (AP4) and DG5 (AP5) on
the DG-Board.
3. Remove the fixing screws (7pcs).
4. Remove the AP-Board.
7.11. Removing the H-Board
1. Remove the rear AV bracket (See 7.4.) (and the rear metal
frame). (See 7.5.)
2. Disconnect the flexible cables (H2 and H3), the bridge cable
(H1) and the couplers (H4, H5, H6, H8 and H9).
3. Remove the fixing screws (4pcs).
4. Remove the H-Board.
16
TX-32LXD500 / TX-26LXD500 / TX-32LX500F / TX-32LX500P / TX-26LX500F / TX-26LX500P