CS Maintenance Menu
MPU controls the functions switching for each IICs through IIC bus in this chassis. The following setting and adjustment can
be adjusted by remote control in Service Menu
How to enter into CS Maintenance Menu
Purpose
After exchange parts, check and adjust the contents of adjustment mode.
While pressing [VOLUME ( - )] button on the main unit, press the [RED] button on the remote control for 3 times within
2 seconds.
Note:
Input 2D signal to enter CS Maintenance Menu.
How to exit
Press the [EXIT] button on the remote control.
CS Maintenance Menu
OPT
EDID CLK
DRV CHECK
WB-ADJ
OPT
1.Select [OPT] in CS Maintenance Menu.
2.Press [OK] button or Cursor key [Right] on the remote control.
Exit:
Press the [EXIT] button or the [RETURN] button on the remote control.
CS Maintenance Menu
OPT
7 6 5 4 3 2 1 0
OPT1 0 0 0 0 0 1 0 0
OPT2 1 1 1 0 1 1 1 0
OPT3 0 0 0 0 0 0 0 1
OPT4 0 0 0 0 0 0 0 0
EDID CLK
DRV CHECK
WB-ADJ
Key Command
Press the (
/ / /
) button to step up/down/right/left through the functions and adjustments
Press the
OK
button to change the adjustment values.
Press the
RETURN
button for return to the main menu.
13
Summary of Contents for TX-32FS500B
Page 29: ...Location of Lead Wiring A02 A15 JK8705 A12 WIFI SP_R SP_L K10 CNF1 2 37 32 P2 P3 39 A10 38 29 ...
Page 30: ...Location of Heat Rubbers and Gasket HEATSINK A TOP IC8000 A PCB FA01 IC8000 FA02 GA01 30 ...
Page 32: ...Packing Structure TV SET 30 31 29 Pedestal assy 32 ...
Page 75: ...75 ...
