Panasonic TX-32FS400B, Ehelp

Page: 108 / 300

■
Other Sat. / Satellite
1. Select Auto Setup and press OK to access.
2. Select the satellite.
●
Selectable satellites are Astra2/Eurobird , Astra1 and Hotbird .
●
Check the dish alignment for the satellite to select.
– The Freesat channel uses Astra2 at 28.2° East and Eurobird1
at 28.5° East satellites. To ensure your satellite dish is correctly
installed, consult your Freesat registered dealer. (UK only)
– For information about Astra1 and Hotbird , consult the received
satellite broadcasting companies.
●
If you want to tune from all available satellites, select Any Satellite .
3. Select Start and press OK to access.
4. The signal condition is displayed and press OK to access.
●
If you select Any Satellite , this step is skipped.
●
It takes a while to check the connection for your selected satellite.
●
Ensure that the Signal Lock status is shown as Locked . If it is not
locked, the search cannot be executed.
●
If the status is shown as Not locked and Signal Quality / Signal Strength
have no indications, please check the dish alignment. If the status is
shown as Not locked but there are some levels of Signal Quality / Signal
Strength indicated, select Any Satellite in step 2 and try again.
5. A confirmation screen is displayed and press OK to access.
6. Select a search mode and press OK to start Auto Setup . (Settings are
made automatically.)
●
If you select Astra2/Eurobird or Any Satellite , Freesat channels will also
be searched.
●
When the operation is completed, the channel at the lowest position will
be displayed.
■
Auto Setup using the buttons on the TV
1. Press and hold INPUT/OK/HOLD for MENU button for 3 seconds to
display the menu.
2. Set Auto Setup with following control panel buttons.
●
Move the cursor / select from a range of options / select the menu item
●
Access the menu / store settings after adjustments have been made or
options have been set with INPUT/OK/HOLD for MENU button
- 108 -