7
What is Q
--
Link ?
Q
--
Link allows direct communication between the TV and a Q
--
Link (or Q
--
Link compatible) VCR, this will enable features such as
downloading of tuning information from the TV to the VCR.
When using a
“Q--Link”
VCR the main features possible are the following :
D
Preset Download
--
Downloading of tuning information from the TV to the VCR.
D
Direct TV Record
--
For immediate recording of the current program (What You See Is What You Record).
D
TV/VCR Auto Power On
--
When the VCR plays a tape the TV will automatically switch On and select the AV2 input.
D
VCR Auto Power Standby
--
When the TV is switched into Standby, the VCR will also switch into Standby.
D
VCR Image view On
--
If the TV is in Standby mode and the VCR sends a menu to be displayed on the TV screen
(e.g. Main menu), the TV will automatically switch On and the menu will be displayed.
When using a “
NEXTVIEWLINK
”
VCR the main features possible are the following :
D
Preset Download
--
Downloading of tuning information from the TV to the VCR.
D
Direct TV Record
--
For immediate recording of the current program (What You See Is What You Record).
This TV will also communicate with other VCR’s that bear the following logos :
D
“DATA LOGIC” (a trademark of Metz Corporation).
D
“Easy Link”
(a trademark of Philips Corporation).
D
“Megalogic”
(a trademark of Grundig Corporation).
D
“SMARTLINK”
(a trademark of Sony Corporation).
These VCR’s may support some or all of the above functions. Refer to the VCR operating instruction book.
Further information on Q
--
Link can be found on page 36.
In order for Q
--
Link to function correctly, the Scart cables must be connected correctly. Please see page 6, option 2
It is advised, that if you wish to use your VCR in a recording capacity, it must be connected to the AV2 SCARTsocket of your TV.
AV2 out
offers you a choice of signals to send to the AV2 SCART socket. You can choose from the signals currently tuned on the
Analogue
or
Digital
tuners, or
Monitor
--- the picture displayed on screen.
Using this recording method, you can record a DTT programme whilst watching an analogue programme or vice versa. Similarly,
you can record a DSAT programme whilst watching an analogue programme or vice versa.
NOTE :
You cannot record a DSAT programme whilst watching a DTT programme, or indeed record a DTT programme whilst watching a
DSAT programme.
From the Main menu,
access the Setup menu
Move to AV2 out
Choose the signal you wish
to send to the AV2 SCART socket
If you choose
Analogue
, the TV will send the analogue signal to the AV2 SCART socket.
If you choose
Digita
l, the TV will send the active digital signal (DTT or DSAT) to the AV2 SCART socket.
If you choose
Monitor
, the TV will send whichever program you are currently viewing to the AV2 SCART socket.
NOTES :
If you choose
Digital
, only the active digital signal will be sent. If you switch between digital signals on your TV, the signal sent to your
AV2 SCART socket will also be switched.
Remember to set your VCR to the correct programme position before you start recording. If you have followed the Scart connection
guide on page 6, your programmes will appear on position AV1.
To record a programme using AV2 OUT
QUICK START GUIDE
All manuals and user guides at all-guides.com
