Panasonic TX-32DS600E Ehelp Download

Page: 277 / 288

Analogue TV

Before requesting service or assistance, please follow these simple guides to

solve the problem.
If the problem still persists, please contact your local Panasonic dealer for

assistance.

White spots or shadow image (ghosting) occurs / Some channels cannot be

tuned

●

Check the position, direction and connection of the aerial.

●

Weather conditions affect signal reception (heavy rain, snow, etc.), in

particular in poor reception areas. Even during good weather, the high

pressure can cause poor reception of some channels.

●

Turn the TV off with Mains Power On / Off switch, and then on again.

●

If the problem persists, consult your local dealer or service provider for the

availability of services.

- 277 -

Summary of Contents for TX-32DS600E

































































































































































































































































































Search results

Summary of Contents for TX-32DS600E

Reviews:

Related manuals for TX-32DS600E

Brands by name

Popular brands

Panasonic TX-32DS600E, Ehelp

Search results

Summary of Contents for TX-32DS600E

Reviews:

Related manuals for TX-32DS600E

Brands by name

Popular brands