29
Tuning Menu
1. If a clear picture cannot be obtained even when a Broadcast or AV signal is received, refer to the “Colour System Selection”
operation on page 27.
2. After the Manual tune is finished, press the Programme Number “Up” Button to confirm the tuning condition for each Programme
Numbers. If some Programme Numbers are unused, it is possible to skip such Programme Numbers.
3. When using a VCR without video and audio input/output terminals, it is convenient to connect the aerial cable as indicated in the
instruction manual of VCR and to set the designated channel to programme No.“0”. In that case, perform manual tune after
setting the colour system and sound system in advance. Further, in multi-system VCR, it is more convenient to set the designated
channel to several programme Numbers.
Helpful Hint
Before Auto tune, set the “SYSTEM SELECTION” and “CHANNEL SELECT” mode.
Manual tune
1
Press
F
(Front panel) until Tuning mode is reached.
2
Press
–/
or
+/
to access Tuning mode.
3
Press
TV/AV
to move between Change programme, Search and Change TV
system.
4
Press
–/
or
+/
to change programme position or start search.
When the desired station is found, press
STR
to store.
The programme position will flash.
Repeat above procedure to tune additional programme positions.
Press
F
at any time to exit the Tuning menu.
100Hz PROGRESSIVE PIP TEXT TX-34P250T
STR
F
–/
+/
TV/AV
CH 2
5.5 MHz
2
MANUAL TUNE (FRONT PANEL)
– / + : SEARCH
TV/AV : MOVE CURSOR
STR : TO STORE
F : TO EXIT
STR
F
TV/AV
+/
–/
1
Press
SET UP
.
2
Move to chosen menu option by using
or
.
3
Access Tuning menu by using
or
.
4
Move to chosen menu option by using
or
.
5
Access Manual Tune by using
or
.
6
Select the programme position to be tuned by using
or
.
7
Press repeatedly until required station is found by using
or
.
When the desired station is found, press
STR
to store.
The programme position will flash.
Press
TV/AV
at any time to go back to watching TV.
E X I T
RETURN
TV/AV
SEARCH – /+
PROGRAMME – /+
BUTTON STORE
’STR’
MANUAL TUNE
CH 2
2
Manual tune (via front panel)
It is also possible to use the control panel buttons on the front of the TV to tune individual programme positions
PICTURE
SOUND
SET UP
TV/AV
