Service position for the A-Board
1.
Remove the A-board from the main chassis (E-board), see fig. 5, ensuring all leads are disconnected.
2.
Remove the two screws (A) (fig.9) from the plastic AV cover and unclip the AV cover from the A-board.
3.
Unclip the front metal cover (Fig10) and remove from the A-board.
4.
For ease of servicing remove the rear metal cover by desoldering (Fig.11)
5.
Fit the extension leads to the A-board making sure that the A-board does not touch the E-board (fig.12).
6.
After servicing ensure all wiring is returned to its original position before returning the receiver to the customer.
Note :
The extension lead wire kit is supplied as a service kit. (Part number TZS2EP001).
Service Position for the K-Board
A
A
1.
Remove the two screws (A) indicated in fig.13 to release K-Board
2.
Slide the K-Board out of the chassis holding position and gently release making sure that the K-board does not touch the
E-board.
All manuals and user guides at all-guides.com
Summary of Contents for TX-29AD1DP
