Panasonic TX-28PL1, Service Manual

Page: 4 / 37

HOW TO MOVE THE CHASSIS INTO SERVICE POSITION
1. Remove the bead clamper from the mains lead.
2. Hold and lift the rear of the chassis and gently pull the chassis towards you, as shown in Fig.4.
3. Release the respective wiring clips and rotate the chassis horizontally through 90° anti-clockwise.
4. Locate the chassis to position Fig .7. :
Using a speaker screw, screw the chassis frame into the top speaker fixing rib (A), as shown in Fig.5 .
Put the bottom of the chassis into Fig.6 position.
5. After servicing ensure all wiring is returned to its original position before returning the receiver to the customer.
4
Fig.4 .
Fig. 7.
Fig.5 .
( A )
( A )
Fig. 6.