Panasonic TX-27LWD500A, Operating Instructions Manual, Page: 18 / 32

Shipping Condition
The
Shipping Condition menu will reset all data; clearing all tuning information and resetting all control levels back
to factory settings.
DVB Mode
Press the
MENU Button.
Use the UP and DOWN buttons to move to the Setup Menu .
Press the LEFT or RIGHT button to access the Setup Menu .
Use the UP and DOWN buttons to move to the Shipping Condition feature.
Use the LEFT and RIGHT buttons to access the Shipping Condition feature
Press EXIT to exit or press OK to start
Shipping Condition
All tuning data will be erased
You will be given a warning message followed by two
chances to change your mind.
Press
OK again to confirm.
Each time that you are asked, “Are you sure?” press
OK to confirm, (or EXIT to exit the Shipping Condition )
There is a short delay before the operation starts.
You will be taken to the Auto setup option.
You can either start the Auto setup or change the State / Territory code.
Auto setup will begin, stations will be located, sorted and stored ready for use.
Analogue Mode
Press the
MENU Button.
Use the UP and DOWN buttons to move to the Setup Menu .
Press the LEFT or RIGHT button to access the Setup Menu .
Use the UP and DOWN buttons to move to the Shipping Condition feature.
Use the LEFT and RIGHT buttons to access the Shipping Condition feature
Press EXIT to exit or press OK to start
Shipping Condition
All tuning data will be erased
You will be given a warning message followed by two
chances to change your mind.
Press
OK again to confirm.
When you are asked, “Are you sure?” press
OK to confirm, (or EXIT to exit the Shipping Condition ).
There is a short delay before the operation starts.
Auto setup will begin, analogue stations will be located and stored ready for use.
18