Panasonic TX-26LX500F Operating Instructions Manual Download Page 26

Page: 26 / 44

Select

SD : Return

Delete

Lock

Exit

Play

MPEG4
VIEW MODE

00001/00028

Filename : MOL001
Date :

01/01/2000

Card operations

To enter Card operations mode

Press the

button.

To return to the SD card menu

Press the

EXIT

button.

To exit Card operation

During the SD card menu is displayed, press the

button to return

to normal picture.

MPEG4 view

The moving pictures recorded by this unit, DIGA or D-snap will be played back.
This function is supported by SD cards only.

Press the

button.

Move to choose

MPEG4 view

Access

MPEG4 view

The thumbnail screen is displayed.

Select the

le.

Press the

button.

The moving picture starts.

Notes:

• Picture menu, Sound menu (in playback only) or Viewing setup (in

thumbnail only) adjustment is possible by pressing the

MENU

button

during MPEG4 view.

• “Date” shows the date on which the recording was made by this unit,

DIGA or D-snap. Its format is 01/01/2000 when recordings are made
without date signal.

SD card

MPEG4 view

Photo view

Setup

Memory left

EXIT

SD card

MPEG4 view

Photo view

Setup

Memory left

Basic operation

Error display
(images that could not be loaded, etc.)

Selected File

Inserted card displayed (this does
not appear for PC cards)

Movie without sound

Movie for which lock has been set

Summary of Contents for TX-26LX500F













































Search results

Summary of Contents for TX-26LX500F

Reviews:

Related manuals for TX-26LX500F

Brands by name

Popular brands

Panasonic TX-26LX500F, Operating Instructions Manual

Search results

Summary of Contents for TX-26LX500F

Reviews:

Related manuals for TX-26LX500F

Brands by name

Popular brands