Panasonic TX-24LSW484, Operating Instructions Manual

Page: 8 / 154

English - 7 -
Other Connections
If you want to connect a device to the TV, make sure that both the TV and the device are turned off before making
any connection. After the connection is done, you can turn on the units and use them.
Connector Type Cables Device
YPbPr
YPbPr
Video
Connection
(back)
VGA to YPbPr Connection Cable
HDMI
Connection
(back&side)
VGA
Connection
(back)
AUDIO IN
VGA/YPbPr
Audio
Connection
(back)
YPbPr/VGA
Audio Cable
SPDIF
SPDIF
(Coaxial Out)
Connection
(back)
AV
AV
(Audio/Video)
Connection
(back) Audio Video Cable
HEADPHONE
Headphone
Connection
(side)
USB
Connection
(side)
CI
Connection
(side)
CAM
module
LAN
Ethernet
Connection
(back) LAN / Ethernet Cable
To enable VGA/YPbPr audio, you will
need to use the back audio inputs
with a VGA/YPbPr audio cable for
audio connection. When using the
wall mounting kit (contact your dealer
to purchase one, if not supplied),
we recommend that you plug all your
cables into the back of the TV before
mounting on the wall. Insert or remove
the CI module only when the TV is
SWITCHED OFF. You should refer to
the module instruction manual for de -
tails of the settings. The USB inputs on
the TV support devices up to 500mA.
Connecting devices that have current
value above 500mA may damage your
TV. When connecting equipment using
a HDMI cable to your TV, to guarantee
sufficient immunity against parasitic
frequency radiation and trouble-free
transmission of high definition signals,
such as 4K content, you have to use
a high speed shielded (high grade)
HDMI cable with ferrites.