Panasonic TX-21AT1C, Operating Instructions Manual

Page: 4 / 20

4
MAIN CONTROLS
Front Panel
Power switch
Saving of the tuning modes and other function
adjustments (STR)
F
(Selection of functions)
Functions are displayed on the screen, another press
will select accessible functions such as volume,
contrast, brightness, colour, sharpness, tint (NTSC only),
setup mode.
Programme number up and down (pre---saved). If the
selected function has been displayed on the screen,
increase or decrease the level of the selected function
by pressing the button.
TV/AV switch (see page 12).
Headphones jack
(see page 16).
Red light is a standby mode indicator.
To switch on the unit press the
stand---by mode button, + / --- button
or 0 to 9 buttons.
RCA audio/video jack (see page 16).
Remote Control Unit
Power or stand---by.
Adjusts the selected functions. If the
required function has not been
selected, adjusts the volume.
Selects functions. Press to select
menu on the screen (see page 5).
Recalls the levels selected with the
STR button (on the unit front panel).
Cancels the menu indications on the
screen.
Numbered buttons to:
--- change programmes;
--- directly select channels;
--- teletext page selection.
Direct channel selection: press and
select the channel on the numbered
buttons.
If you want to select a channel in the
HYPERBAND (cable TV) with the
direct channel selection button,
press the direct channel selection
button, then programme up and
down button (“C” and “---/--- ---”) and
select the number with the numbered
buttons.
TV/AV mode selection (see pages 12 and
16).
This button is used to save and confirm the
screen menu indications.
Sound mute
Recall button to display:
--- programme position;
--- channel number;
--- time;
--- teletext station name.
Channel number up and down, menu line
selection, Teletext page selection.
Two---digit (10 to 99) programme number
selection.
Teletext operation buttons (see page 15).
VCR operation buttons (see page 14).
Direct record button (activates
Q---Link)