N O T E
n
Confirm that the RAM module is fixed with the hooks (E) as shown below.
3.
Remove the release paper (F) of the sheet supplied with the recommended RAM module.
4.
Firmly attach the RAM module and the seal (G).
5.
Set the cover, screw and battery pack.
Use the PH 1 (PH #1) screwdriver.
The screw used is 1.
Recommended tightening torque
0.45 N•m ± 0.05 N•m (4.5 kgf•cm ± 0.5 kgf•cm)
I M P O R TA N T
n
Set the cover and battery pack correctly so that they do not fall when you carry the computer.
N O T E
