background image

4

Read Me First

G

ett

in

g S

ta

rte

d

U

se

ful

 In

formati

on

Trouble

s

hooting

Appendi

x

8. This equipment may not be used on coin service pro-

vided by the telephone company. Connection to party 

lines is subject to state tariffs.

9. The Telephone Consumer Protection Act of 1991 

makes it unlawful for any person to use a computer or 

other electronic device to send any message via a 

telephone fax machine unless such message clearly 

contains in a margin at the top or bottom of each trans-

mitted page or on the first page of the transmission, 

the date and time it is sent and an identification of the 

business or other entry, or other individual sending the 

message and the telephone number of the sending 

machine or such business, other entity, or individual. In 

order to program this information into your fax soft-

ware, you should refer to the manual of the Fax soft-

ware being used.

10.According to the FCC’s electrical safety advisory, we 

recommend that you may install an AC surge arrestor 

in the AC outlet to which this equipment is connected. 

Telephone companies report that electrical surges, 

typically lightning transients, are very destructive to 

customer terminal equipment connected to AC power 

sources and that this is a major nationwide problem.

“Caution : To reduce the risk of fire, use only No.26 AWG or 

larger telecommunication line cord.”

“ATTENTION : Pour réduire le risque d’incendie, utiliser 

uniquement des conducteurs de télécommunications 26 

AWG ou de section supérieure.”

16-M-1

Notice for the products using LCD

This product uses one or more fluorescent lamps contain-

ing a small amount of mercury. It also contains lead in 

some components. Disposal of these materials may be 

regulated in your community due to environmental consid-

erations. 

For disposal or recycling information please contact your 

local authorities, or the Electronics Industries Alliance: 

<http://www.eiae.org/>

24-M-1

<For USA-California Only>
This product contains a CR Coin Cell Lithium Battery 
which contains Perchlorate Material- special handling 
may apply.
See http://www.dtsc.ca.gov/hazardouswaste/perchlorate/

38-M-1

Industry Canada (IC) Notice for modem

This equipment contains an Industry Canada approved 
modem unit.
The Industry Canada label is affixed on the modem unit.

EQUIPMENT ATTACHEMENT LIMITATIONS

“NOTICE: The Industry Canada label identifies certified equip-

ment. This certification means that the equipment meets tele-

communications network protective, operational and safety 

requirements as prescribed in the appropriate Terminal Equip-

ment Technical Requirements document(s). The Department 

does not guarantee the equipment will operate to the user’s 

satisfaction.

Before installing this equipment, users should ensure that it is 

permissible to be connected to the facilities of the local tele-

communications company. The equipment must also be 

installed using an acceptable method of connection. The cus-

tomer should be aware that compliance with the above condi-

tions may not prevent degradation of service in some 

situations.

Repairs to certified equipment should be coordinated by a rep-

resentative designated by the supplier. Any repairs or alter-

ations made by the user to this equipment, or equipment 

malfunctions, may give the telecommunications company 

cause to request the user to disconnect the equipment.

Users should ensure for their own protection that the electrical 

ground connections of the power utility, telephone lines and 

internal metallic water pipe system, if present, are connected 

together. This precaution may be particularly important in rural 

areas. Caution: Users should not attempt to make such con-

nections themselves, but should contact the appropriate elec-

tric inspection authority, or electrician, as appropriate.”

“NOTICE: The Ringer Equivalence Number (REN) assigned to 

each terminal device provides an indication of the maximum 

number of terminals allowed to be connected to a telephone 

interface. The termination on an interface may consist of any 

combination of devices subject only to the requirement that the 

sum of the Ringer Equivalence Numbers of all the devices 

does not exceed 5.”
REN: See bottom of the computer

RESTRICTIONS CONCERNANT LE RACCORDEMENT

DE MATÉRIEL

“AVIS: L’étiquette d’Industrie Canada identifie le matériel 

homologué. Cette étiquette certifie que le matériel est con-

forme aux normes de protection, d’exploitation et de sécurité 

des réseaux de télécommunications, comme le prescrivent les 

documents concernant les exigences techniques relatives au 

matériel terminal. Le Ministère n’assure toutefois pas que le 

matériel fonctionnera à la satisfaction de l’utilisateur.

Avant d’installer ce matériel, l’utilisateur doit s’assurer qu’il est 

permis de le raccorder aux installations de l’entreprise locale 

de télécommunication. Le matériel doit également être installé 

en suivant une méthode acceptée de raccordement.

L’abonné ne doit pas oublier qu’il est possible que la confor-

mité aux conditions énoncées ci-dessus n’empêche pas la 

dégradation du service dans certaines situations.

Les réparations de matériel homologué doivent être coordon-

nées par un représentant désigné par le fournisseur.

L’entreprise de télécommunications peut demander à l’utili-

sateur de débrancher un appareil à la suite de réparations ou 

de modifications effectuées par l’utilisateur ou à cause de 

mauvais fonctionnement.

Pour sa propre protection, l’utilisateur doit s’assurer que tous 

les fils de mise à la terre de la source d’énergie électrique, des 

lignes téléphoniques et des canalisations d’eau métalliques, 

s’il y en a, sont raccordés ensemble. Cette précaution est par-

ticulièrement importante dans les régions rurales. Avertisse-

ment: L’utilisateur ne doit pas tenter de faire ces 

raccordements lui-même; il doit avoir recours à un service 

d’inspection des installations électriques, ou à un électricien, 

selon le cas.”

“AVIS: L’indice d’équivalence de la sonnerie (IES) assigné à 

chaque dispositif terminal indique le nombre maximal de ter-

minaux qui peuvent être raccordés à une interface. La termi-

naison d’une interface téléphonique peut consister en une 

combinaison de quelques dispositifs, à la seule condition que 

la somme d’indices d’équivalence de la sonnerie de touts les 

dispositifs n’excède pas 5.”
IES: Voir sous le fond de l’ordinateur

17-Ca-1

Models for Canada

CF-Y5mk2_DFQX5637ZA_US.book  4 ページ  2006年11月7日 火曜日 午前9時24分

Summary of Contents for Toughbook CF-Y5LWEZZBM





































Reviews: