background image

5

Using the Touch Pad

NOTE

z

You can change the speed of the double-click or the operations of mouse buttons by clicking 

 (Start) - [Control 

Panel] - [Mouse].

There are two ways of scrolling with the Touch Pad: the Touch Pad utility, and the Virtual Scrolling Function. You cannot use 
both functions at the same time.
The Touch Pad utility is enabled in the default setting.

z

The Touch Pad utility (below)
You can scroll continuously by tracing a circle on the Touch Pad.

z

The Virtual Scrolling function (

Î

page 10

)

You can scroll vertically (or horizontally) by tracing repeatedly in the desired direction.

You can use separate settings for each account regarding whether to use the Touch Pad utility or the Virtual Scrolling func-
tion.

Using the Touch Pad Utility

You can scroll easily by tracing a circle on the Touch Pad.

NOTE

z

External mouse drivers cannot be used at the same time as the Touch Pad utility. (

Î

page 60

)

1

Make the following settings to use the horizontal scroll.

Once the settings have been made, it is not necessary to make the same settings the next time.

Scroll

Vertical scroll

It can be used in the default setting.

Horizontal scroll

A setting is required to use the horizontal scroll. 

Vertical scroll

The Virtual Scrolling function must be set to enable.

Horizontal scroll

Summary of Contents for Toughbook CF-Y5LWEZABM











































































































Reviews: