background image

19

Pr

epar

ations

7

Setup Windows.

Moving the cursor   or clicking buttons can be performed with the touch pad 
(A) and left button (B).

z

During operations, it may take some time before the next screen is dis-
played.
Wait, and do not press any keys, or touch the touch pad, etc.

A

At [Welcome to the Windows XP Setup Wizard], click [Next].

B

After reading the agreement, click [I accept this agreement], then click 
[Next].

z

If [I don’t accept this agreement] is selected, the Windows setup will be 
aborted.

C

Select settings for your region, then click [Next].

D

Enter your name and then click [Next]. (You do not need to enter your 
organization.)

E

Enter your computer name and administrator password and then click [Next]. 

z

"Computer name" is for recognizing this computer when multiple com-
puters are connected via the network.

z

Remember this password! This password may be needed to manage 
the computer.

F

Enter the correct date, time and the time zone, then click [Next].

z

Click  

or  

to 

set.

z

If set properly, click [Next].

G

Enter your password set in step 

E

 and click 

.

z

When inputting the password, confirm that character input is not set to 
“Caps Lock” or “NumLk.” (

Î

page 16)

NOTE

z

When Windows setup is completed
• The following message will be displayed at the bottom right of the screen: 

"Your computer might be at risk." Continue to the next step.
The message is generated by the [Security Center] function in [Control Panel], 
and does not indicate an error or malfunction. For more information about 
[Security Center]: 

Î

page 42

z

It may take some time before the computer restarts. Wait, and do not 
press any keys, or touch the touch pad, etc.

z

After being set automatically, the computer will restart automatically, 
and Windows will start.

Summary of Contents for Toughbook CF-W2FWCZZBM













































































Reviews: