Panasonic Toughbook CF-VDL02BM, Operating Instructions Manual, Page: 12 / 40

E
12
2 Make necessary changes
3 Select [OK]
Adjustments can be made when double-click operations are assumed by the com-
puter although single-click operations are intended, by clicking [Windows] from the
display shown in the previous page and decreasing the value for [Time] in [Double
Click Settings].
Immediately run [Calibrate] when the number of Calibration Points is changed.
It is also possible to change the double click speed for [Tap and Buttons]*
1
.
It is important to note that when the double click speed for [Mouse] is changed, the
double click time for [Windows] is also changed.
*1
Windows XP
: in [start] - [Control Panel] - [Printers and Other Hardware] - [Mouse].
Windows 2000
: in [Start] - [Settings] - [Control Panel] - [Mouse].
<Only for CF-M34 series models other than the CF-M34C ****** >
You can use the touchscreen without changing the settings when the LCD Monitor is
connected to Serial Port B. To connect to Serial Port A, select [Hardware] and set
[Settings For] to [Device 2] and [Com port] to [COM1].
<Only for the models with the Display Rotation Tool>
Rotate the display to landscape mode (0 degrees) before performing the calibration.
NOTE
Touchscreen