4
Getting Started
Read Me First
Models for U.S.A.
Federal Communications Commis-
sion Radio Frequency Interference
Statement
Note: This equipment has been tested
and found to comply with the limits for
a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits
are designed to provide reasonable
protection against harmful interference
in a residential installation. This equip-
ment generates, uses and can radiate
radio frequency energy and, if not
installed and used in accordance with
the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that
interference will not occur in a particu-
lar installation. If this equipment does
cause harmful interference to radio or
television reception, which can be
determined by turning the equipment
off and on, the user is encouraged to
try to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving
antenna.
Increase the separation between
the equipment and receiver.
Connect the equipment into an
outlet on a circuit different from that
to which the receiver is connected.
Consult the Panasonic Service
Center or an experienced radio/TV
technician for help.
Warning
To assure continued compliance, use
only shielded interface cables when
connecting to a computer or peripheral.
Also, any changes or modi
fi
cations not
expressly approved by the party re-
sponsible for compliance could void
the user’s authority to operate this
equipment.
FCC RF Exposure Warning:
<Only for model with wireless LAN/
wireless WAN/Bluetooth>
This equipment complies with FCC
radiation exposure limits set forth
for an uncontrolled environment.
This equipment has been approved
for portable operation, and if pro-
vided with wireless WAN transmit-
ter, requires LCD side panel spac-
ers to provide minimum 1.5 cm
spacing between antenna located
within the LCD side panel, and all
person’s body (excluding extremi-
ties of hands, wrist and feet) during
wireless modes of operation.
This equipment may use multiple
installed transmitters, which may be
capable of simultaneous transmis-
sion.
This equipment is provided with
external antenna connector(s) for
connection to optional Cradle for
mobile external mounted
antenna(s). External antenna(s)
must be professionally installed and
cannot exceed recommended maxi-
mum antenna gain as described in
individual provided supplement
instructions for wireless transmit-
ters. The maximum allowable an-
tenna gain for the external WWAN
base whip antenna for the cellular
band is 2.23 dBi and PCS band is
3.84 dBi. Also, user must maintain
minimum 20 cm spacing between
external antenna(s) and all person’s
body (excluding extremities of
hands, wrist and feet) during wire-
less modes of operation.
25-M-1-3
CF-U1̲Vista̲US.indb 4
CF-U1̲Vista̲US.indb 4
2009/02/19 16:35:29
2009/02/19 16:35:29
