Panasonic Toughbook CF-T7BWATAAM, Supplementary Manual

Page: 7 / 12

7
Installing the Software
Installing the Software
The steps below must be taken before using the HSDPA/UMTS modem.
1
Turn off the wireless switch.
2
Turn on or restart the computer, and run the Setup
Utility by pressing
F2
while [Panasonic] boot screen is
displayed.
If [Enter Password] is displayed, input the Supervisor Password.
3
Select the [Advanced] menu, and set [Wireless WAN] to
[Disable].
4
Save the settings and exit the Setup Utility.
5
Log on to Windows with the administrator authority.
6
Install the wireless WAN software (MobiLink) by following
procedure.
A
<Only CF-T7 Series>
Connect the CD/DVD drive.
B
Set the Wireless WAN (HSDPA/UMTS) Software CD-ROM into the CD/
DVD drive.
C
<Model with Windows XP>
Click [start] - [Run], enter “x:
*1
\SETUP.BAT”, and click [OK].
<Model with Windows Vista>
Click (Start) and enter “x:
*1
\SETUP.BAT” in [Start Search], and press
Enter
, and then click [Allow] on the [User Account Control] screen.
*
1
“x:” is the drive letter of the CD/DVD drive. Change this to match the drive
letter on your own computer.
D
Follow the on-screen instructions, and install the software.
7
Turn off the computer.
8
Turn on the computer, and run the Setup Utility by
pressing
F2
while [Panasonic] boot screen is displayed.
If [Enter Password] is displayed, input the Supervisor Password.
9
Select the [Advanced] menu, and set [Wireless WAN] to
[Enable].
10
Save the settings and exit the Setup Utility.
11
Turn on the wireless switch.
DFQW5151ZA.indd 7 2008/01/09 9:11:37