![background image](http://html1.mh-extra.com/html/panasonic/toughbook-cf-t2fwatzbm/toughbook-cf-t2fwatzbm_operating-instructions-manual_3906141039.webp)
39
Appendix
1
Turn off the computer and connect the DVD-ROM & CD-R/RW drive to the computer.
2
Turn the computer on, and press
F2
while [Panasonic] boot screen is displayed.
The Setup Utility will start up.
If a password has been set, enter the Supervisor Password.
You cannot register [Boot] menu with a User Password.
3
Select the [Boot] menu, then select [USB CD/DVD Drive] and press
F6
until [USB CD/DVD
Drive] is at the top of the [Boot] menu.
4
Place disc number one of the recovery CDs into the DVD-ROM & CD-R/RW drive.
5
Press
F10
.
At the confirmation message, select [Yes] and press
Enter
.
The computer will restart. If [Enter Password] is displayed during the following procedures, input
the Supervisor Password or the User Password.
This screen should appear.
Regarding backup area
• Requires availability of at least half of the entire hard disk. Without sufficient space
available, the backup area cannot be created.
• When the backup area is created, the usable hard disk capacity will be reduced to less
than half.
• The backup area cannot be accessed from Windows. For this reason, backed up data
cannot be copied to CD-R or other removable disk media.
• When the hard disk backup function is executed, data in the backup area will be over-
written. If newly created or edited data is backed up later, data stored previously
in the backup area will be lost.
NOTE
Create a Backup Area
When dividing the hard disk into partitions
Do not execute [1. [Recovery]] to divide the hard disk into partitions. The hard disk
backup function cannot be enabled after the hard disk has been partitioned. Use step
8
to divide the hard disk.
CAUTION
---------------------------------------------------------------------
Select a number
---------------------------------------------------------------------
1. [ Recovery
] Reinstall Windows.
2. [ Erase HDD ] Erase the whole data on HDD for security.
3. [ Backup
] Enable the Backup function.
0. [ Cancel
] Cancel.
---------------------------------------------------------------------
6
Press
3
to execute [3. [Backup]].
7
At the confirmation message, press
Y
.
The usable hard disk area
[At the time of purchase]
[After the backup area is created]
The backup area
Cannot be accessed
from Windows.
Can be accessed from
Windows (One partition).
8
Select how to divide the hard disk from the menu.
<To create a backup area and enable the backup function without dividing the hard disk>
Select [1].
Summary of Contents for Toughbook CF-T2FWATZBM
Page 47: ...47 Appendix Memo ...