Panasonic Toughbook CF-S9KWAZG1M Reference Manual Download Page 141

Page: 141 / 192

141

Setup Utility

To change the boot order

Press

Enter

on the boot device you want to change and select the boot device from the following menu.

• When a selected boot device in the following menu already exists in either of the [Boot Option (#1 to #6)]

, the boot

device appears at the newly selected position by switching the positions with the original boot device that existed before
at the position.

• When you select [Disabled] in the following menu, the disabled [Boot Option] is ignored and the boot device in the next [Boot

Option] operates.

The operation is confirmed by Panasonic USB floppy disk drive (optional: CF-VFDU03U).

For CF-C1 Series: [Boot Option (#1 to #7)]

Hard Disk
CD/DVD Drive
LAN
USB Floppy Disk

USB Hard Disk
USB CD/DVD Drive
Disabled

Summary of Contents for Toughbook CF-S9KWAZG1M

































































































































































































Search results

Summary of Contents for Toughbook CF-S9KWAZG1M

Reviews:

Related manuals for Toughbook CF-S9KWAZG1M

Brands by name

Popular brands

Panasonic Toughbook CF-S9KWAZG1M, Reference Manual

Search results

Summary of Contents for Toughbook CF-S9KWAZG1M

Reviews:

Related manuals for Toughbook CF-S9KWAZG1M

Brands by name

Popular brands