87
Setup Utility
NOTE
z
To boot from the following devices, make the settings as below.
Underlined items are the factory presets.
*5
Only when connected to CF-VEBH11AU : “Press F2 for Setup / F12 for LAN”
*6
Only when connected to CF-VEBH11AU
*7
You need to set the computer to the Cradle and connect an external keyboard to the Cradle, when the computer starts.
To boot from
You need to set
• USB connected device
: [Legacy USB Support] to [Enabled] (
Security Menu
Boot Prompt Configuration
Setup Utility Prompt
• When [Setup Utility Prompt] is set to [Disabled], the message “Press F2 for Setup”
is not dis-
played on [Panasonic] boot screen. However
F2
,
F12
and
Del
will work even if the message
is not displayed.
Disabled
Enabled
Password on Boot
Disabled
Enabled
Set Supervisor Password
Enter the sub-menu.
Hard Disk Lock
• Can be changed only when [Set Supervisor Password] is set.
Disabled
Enabled
User Password Protection
No Protection
Protected
Set User Password
• Can be changed only when [Set Supervisor Password] is set.
Enter the sub-menu.
X
Embedded Security (TPM)
Enter the sub-menu.
X
Fingerprint Security
Enter the sub-menu.