Panasonic Toughbook CF-F9KWH011M Reference Manual Download

Page: 155 / 205

155

Setup Utility

Boot Prompt Configuration

Underlined items are the factory presets.

Security Menu

Setup Utility Prompt

• When [Setup Utility Prompt] is set to [Disabled], the message “Press F2 for Setup / F12 for LAN”

is not displayed on [Panasonic] boot screen. However, F2 and F12 will work even if the message
is not displayed.

Disabled
Enabled

Boot Popup Menu

Disabled
Enabled

Password On Boot

Disabled
Enabled

Password On Resume

Disabled
Enabled

Boot Device on Hibernation Resume

Try prior devices
Hard Disk only

Set Supervisor Password

Enter the sub-menu.

Hard Disk Lock

• Can be changed only when [Set Supervisor Password] is set.

Disabled
Enabled

User Password Protection

No Protection
Protected

Set User Password

• Can be changed only when [Set Supervisor Password] is set.

Enter the sub-menu.

Embedded Security (TPM)

• Only for model that supports TPM
• For information on TPM, refer to the

Installation Manual

of “Trusted Platform Module (TPM)”.

Click

(Start)/

[start], input “c:\util\drivers\tpm\readme.pdf” in

[Search programs and files ]/

[Run], and press

Enter

Enter the sub-menu.

Fingerprint Security

• Only for model with Fingerprint Reader

Enter the sub-menu.

AMT Configuration

• Only for model that supports AMT

Enter the sub-menu.

Windows 7

Windows XP

Windows 7

Windows XP

Summary of Contents for Toughbook CF-F9KWH011M














































































































































































































Search results

Summary of Contents for Toughbook CF-F9KWH011M

Reviews:

Related manuals for Toughbook CF-F9KWH011M

Brands by name

Popular brands

Panasonic Toughbook CF-F9KWH011M, Reference Manual

Search results

Summary of Contents for Toughbook CF-F9KWH011M

Reviews:

Related manuals for Toughbook CF-F9KWH011M

Brands by name

Popular brands