background image

89

Hard Disk Backup/Restore Function

[Backup and Restore Center] and [System Recovery Options] allow you create a backup of the entire hard disk data, which 
can be used to recover from hardware failure.

To create a backup of the entire hard disk to another storage media (e.g., external hard disk): Use [Back up computer].
To create a backup of a file or a folder: Use [Back up files].
For further information, click 

 (Start) - [Control Panel] - [Back up your computer].

NOTE

Connect the AC adaptor and do not remove it until backup is complete.

NOTE

This function does not work when you turn on the computer for the first time or just after you reinstall Windows.
Start and shut down Windows Vista, and then you can use the function.
Connect the AC adaptor and do not remove it until restoration is complete.

1

Turn on the computer, and when [Panasonic] boot screen disappears, press and hold 

F8

.

If [Enter Password] is displayed during the following procedure, input the Supervisor Password or the User 
Password.

2

Release your finger when [Advanced Boot Options] is displayed.

3

Press     to select [Repair Your Computer] and press 

Enter

.

[System Recovery Options] appears.

4

Select the keyboard layout and click [Next].

5

Select [User name] and input [Password], then click [OK].

6

Click [Windows Complete PC Restore] and follow the on-screen instructions.

Panasonic Corporation will bear no responsibility for any damage suffered (including loss of data) as a result of the use of 
this function.

Creating a Backup of the Hard Disk Data

Restoring the Hard Disk Data

Summary of Contents for Toughbook CF-74CCB02BM














































































































Reviews: