13
Getting S
tarted
CAUTION
Remember this password! If the password is forgotten, Windows cannot
be operated.
3
Select settings for your region, then select [Next].
4
Enter your name and organization and then select [Next].
5
Enter your computer name and administrator password and then select [Next].
6
Enter the correct date, time and time zone, then select [Next].
The computer will restart.
NOTE
It may take some time before the computer restarts and the screen of step
7
is displayed. Wait, and do not press any keys, touch the touch pad, etc.
When creating a new user account:
• If you make mail settings, create password reset disks (
page 14), or con-
duct other related operations before creating the user account, you will be
unable to use any previous mail history or settings.
• When you create the first new account, you can only select [Computer admin-
istrator].
Once a “Computer Administrator” account has been created, you can create
additional limited user accounts.
Note also that only the added user account will be displayed in the Welcome
screen. The account for the administrator created during Windows setup will
not be displayed.
NOTE
CAUTION
Remember this password! If the password is forgotten, Windows cannot be
operated. You can create a password reset disk beforehand (
page 14).
8
Create a new account.
1
Select [start] - [Control Panel] - [User Accounts] - [Create a new account].
2
Enter a name for the new account, then select [Next].
3
Select [Computer administrator], then select [Create Account].
4
<When you want to create a password for the new account>
Select the new account you have created and select [Create a password].
Follow the instructions on the screen to create a password.
5
Select [start] - [Turn Off Computer] - [Restart] to restart the computer.
NOTE
When Windows setup is completed, the following message will be displayed
at the bottom right of the screen: “Your computer might be at risk.” Con-
tinue to the next step.
The message is generated by the [Security Center] function in [Control Panel],
and does not indicate an error or malfunction. For more information about
[Security Center]:
page 21.
7
Enter your administrator password and select .
Wait until the hard disk drive indicator has turned off.
