61
B's Recorder/B's CLiP
C
Add a check mark for [Disable B’s CLiP] at [System configuration], and select
[OK].
D
When a message appears asking if you want to restart your computer, select
[Yes].
• To start using B’s CLiP again, remove the check mark from [Disable B’s CLiP] using
step
C
described above, and select [OK].
If you have uninstalled B’s Recorder or B’s CLiP accidentally:
Reinstall it by following the steps below.
A
Log on to Windows with the administrator authority.
B
Set Product Recovery DVD-ROM in the CD/DVD drive.
C
Select [start] - [Run], input [d:\bha\setup.exe]
, and then select [OK].
Follow the on-screen instructions.
• When the message that requires the serial number appears during the
installation, input the serial number that is located under "Dealing with
Problems (Summary)" in the
Operating Instructions
.
• When the installation is complete, the display will say that the computer
should be restarted after removing the disk, nevertheless, be sure to
restart it without removing the Product Recovery DVD-ROM.
*1
"d:" is the drive letter of the CD/DVD drive. Change this to match the drive letter on your own
computer.
