background image

6

Standby/Hibernation Functions

• When any of the multimedia pocket device indicator 

*1

, the hard disk drive indicator 

 and the SD Memory Card indi-

cator 

 is on.

• When playing/recording audio files or displaying motion video such as MPEG files.
• When playing a DVD-Video.
• When writing to a disk.
• When using communication software or network function.
• When using a PC Card.

(If the card fails to work normally, restart the computer.)

z

If a disc formatted with B’s CLiP is inserted into the CD/DVD drive (while 

 is displayed on the notification area), the com-

puter cannot enter standby or hibernation mode. Eject the disc beforehand.

z

The computer does not enter standby/hibernation immediately after resuming. Wait approximately one minute.

*1

Except when using a second battery pack

„

To enter standby/hibernation

1

Close the display, or press and hold the power button (A) until a 
beep

*2

 sounds.

Standby: The power indicator (B) blinks green.
Hibernation: The power indicator (B) goes off.

z

You can alternatively use the Windows menu to enter standby/hibernation. To 
enter standby, click [start] - [Turn Off Computer] - [Stand By]. To enter hiberna-
tion, click [start] - [Turn Off Computer], then press and hold 

Shift

 and click 

[Hibernate].

CAUTION

While the computer is entering standby/hibernation

z

Do not:
• Touch the keyboard, touch pad, or power button.
• Use an external mouse or other peripheral device.
• Connect or disconnect the AC adaptor.
• Close or open the display.
Wait until the power indicator blinks green (standby) or goes off (hibernation).

z

It may take one or two minutes to enter standby or hibernation. 

Entering/Resuming from Standby or Hibernation

Summary of Contents for Toughbook CF-51PF66EBM


















































































Reviews: