![background image](http://html.mh-extra.com/html/panasonic/toughbook-cf-18nhhzxbm/toughbook-cf-18nhhzxbm_service-manual_270615029.webp)
7-10
!
Assembly of Glass (Applicable Model : Digitizer Model)
Glass (Digitizer)
LCD Side
Cushion B
TS Spacer A
Be free of overhang..
–0.5mm
Fit this to the
line of cabinet.
0.5~1mm
0.5mm
0.5mm
0.5~1mm
Don’t get into a LCD indication range.
TS Spacer A / TS Spaser B:
0~0.5mm
0.5~1.0mm
A
Detail of "A"
Glass Assy
0~0.5mm
Place this to the wall of cabinet.
Attach the surface to the LCD Front.
–0.5mm
Fit this to the
line of cabinet.
Attach it to the back side.
(Using the jig)
Paste this to backside.
Attach it to the front side. (Using the jig)
Paste this to frontside.
Attach it at the center.
Dimensional tolerance: –0.2
Attach it at the center.
Dimensional tolerance: –0.2
Glass Assy
Attach so it comes at the center part
when the LCD Unit is completely assembled.
AR Film
Protection Sheet
TS Spacer B
TS Spacer B
TS Spacer A