7. Remove the two screws <N>, and remove the LCD.
Screw <N> : DXHM0009XB
8. Remove the LCD signal cable from the LCD.
<O>
<O>
LCD
Hinge R
Hinge L
9. Remove the six screws <O>, and remove the LCD Plate
L/R.
Screw <o> : DXQT2+D25ZMT
14.12. Removing the 14” LCD
1. Disassemble the LCD in the same way as 15” LCD
(page38).
2. Remove the four screws <O>.
Screw <o> : DXQT2+D25ZMT
3. Remove the tape A/B.
4. Remove the two screws and Backlight Angle.
5. Draw the LCD Back light unit slowly from the LCD unit.
<O>
<O>
LCD
Backlight unit
Backlight Angle
Screws
Tape
Tape
Backlight
Hinge R
Hinge L
14.13. Removing the Top Cabinet
<E>
<E>
<E>
<E>
<E>
<E>
<E>
<E>
<F>
<F>
<E>
<E>
<F>
<F>
1. Remove the ten screws <E> and four screws <F>.
Screw <E> : XTB26+10GFZ
Screw <F> : DXHM0009XB
<G>
<G>
Top Cabinet
CN50
CN42
2. Disconnect the connector CN42 and CN50.
3. Remove the two screws <G>, and remove the Top Cabinet.
Screw <G> : DXHM0009XB
4. Release the two ANT Cable.
39
