Panasonic TH37LRT12U - HD LCD DISPLAY, Service Manual

Page: 16 / 83

16
TH-32LRT12U-A * TH-37LRT12U/M/A
6.2.2. Hotel mode menu list
Item Details
Initial Input
Off RF AV1 AV2 AV3 YPbPr HDMI1 HDMI2 HDMI3 PC
Adjusts the input signal when the unit is turned on.
Off: T he input signal when the power was last turned off is set.
Note:
T his menu is available only when "Input Lock" is "Off".
R F mode is available only when Pal T uner is connected.
Onscreen Display
Off : Onscreen information is not displayed.
On : Onscreen information is displayed, such as:
Power on display
Input signal switch display
N o signal display
M ute and the remaining time of off-timer
On 1 : Onscreen information is displayed, except some R S-232C communication information is not
displayed.
•
•
•
•
Initial VOL Level
U sed to set the volume level at power-on.
Off : T he volume is set to the same level as when the power was last turned off.
0 to 63 : T he volume is set to the selected level.
Note :
It is not possible to select an Initial VOL Level setting which is higher than the M aximum VOL Level setting.
Maximum VOL
Level
U sed to set the volume level so that it will not exced the maximum setting.
Off : N o restrictions are placed on the volume level.
0 to 63 : T he volume is restricted to the selected level.
Note :
It is not possible to select a M aximum VOL Level setting which is lower than the Initial VOL Level setting.
Input Lock
Off RF AV1 AV2 AV3 YPbPr HDMI1 HDMI2 HDMI3 PC
Locks the input switch operation.
Off: Input switch can be used.
Note:
R F mode is available only when Pal T uner is connected.
Button Lock
U sed to restrict the operation of the buttons on the main unit.
Off: All the buttons on main unit can be used.
Menu: Locks the Menu button on the main unit.
On: Locks all the buttons on the main unit except the Power button.
Remocon User
Level
Off User1 User2 User3
Off: You can use all of the buttons on the remote control.
User1: You can only use
POWER
,
INPUT
, , MUTE ,
V O L
buttons on the remote control.
User2: You can only use
POWER
button on the remote control.
User3: Locks all the buttons on remote control.
Note: Hotel M ode menu may not be accessible when you select “ U ser2” or “ U ser3”. When this happens,
press the VOL- on the display and the OK button on the remote control at the same time. T he message
“Are you sure to out the mode?” will appear, select “Yes”.