Panasonic TH-P42ST30D, Service Manual

Page: 22 / 133

22
8 Disassembly and Assembly Instructions
8.1. Remove the Rear cover
1. See PCB Layout (Section 3)
8.2. Remove the AC inlet
Caution:
To remove P.C.B. wait 1 minute after power was off for dis-
charge from electrolysis capacitors.
1. Unlock the cable clampers to free the cable.
2. Disconnect the connector (P9).
3. Remove the screws (
×
2 ) and remove the Inlet metal.
4. Remove the screw (
×
1 ) and remove the AC inlet.
8.3. Remove the P-Board
Caution:
To remove P.C.B. wait 1 minute after power was off for dis-
charge from electrolysis capacitors.
1. Unlock the cable clampers to free the cable
2. Disconnect the connectors (P2, P6, P11, P34 and P35).
3. Remove the screws (
×
5 ) and remove the P-Board.
8.4. Remove the Side terminal
cover and the shield metals
1. Remove the claw (
×
1 ).
2. Remove the Side terminal cover.
3. Remove the screws (
×
2 ).
4. Remove the Bottom shield metal.
5. Remove the screw (
×
1 ).
6. Remove the Side shield metal.
8.5. Remove the A-Board
1. Remove the Side terminal cover and the Shield metals.
(See section 8.4.)
2. Unlock the cable clampers to free the cable.
3. Disconnect the connectors (A1, A6, A8, A11 and A14).
4. Disconnect the flexible cables (A20, A31, A32 and A40).
5. Remove the screw (
×
1 ) and remove the A-Board.