background image

46

Maintenance

Caution

Display panel, Cabinet, Pedestal

Mains plug

First, remove the mains plug from the socket outlet.

For regular care:

Gently wipe the surface of the display panel, cabinet, or pedestal by using a soft cloth to clean the dirt 
or fingerprints.

For stubborn dirt:

Dampen a soft cloth with clean water or diluted neutral detergent (1 part detergent to 100 parts water). 
Then wring the cloth and wipe the surface. Finally, wipe away all the moisture.

 

Do not use a hard cloth or rub the surface too hard. This may cause scratches on the surface.

 

Take care not to subject the TV’s surfaces to water or detergent. A liquid inside the TV could lead to 
product failure.

 

Take care not to subject the surfaces to insect repellent, solvent, thinner, or other volatile substances. 
This may degrade surface quality or cause peeling of the paint.

 

The surface of the display panel is specially treated and may be easily damaged. Take care not to 
tap or scratch the surface with your fingernail or other hard objects.

 

Do not allow the cabinet and pedestal to make contact with a rubber or PVC substance for a long 
time. This may degrade surface quality.

Wipe the mains plug with a dry cloth at regular intervals. Moisture and dust may lead to fire or 

electrical shock.

TH-L32A20KMRTX_EN.indd   46

TH-L32A20KMRTX_EN.indd   46

5/14/2010   9:31:36 AM

5/14/2010   9:31:36 AM

Summary of Contents for TH-L32A20KTH-L32A20M





















































Reviews: