22
English
Video equipment connection
9
10
11
14
13
12
1
2 3 4
5
6
7
8
15
1 SERIAL IN:
SERIAL Input Terminal
Control the Display by connecting
to PC.
2 LAN:
LAN Terminal
Control the Display by connecting
to Network.
3 AUDIO OUT:
Analogue Audio Output
Terminal
Connect to audio equipment with
analogue audio input terminal.
4 AUDIO IN:
Analogue Audio Input Terminal
5 PC IN:
PC Input Terminal
Connect to video terminal of PC,
video equipment with “YP
B
P
R
/
YC
B
C
R
” or “RGB” output.
6
7
8
HDMI IN 1:
HDMI IN 2:
HDMI IN 3:
HDMI Input Terminal
(3 systems)
Connect to video equipment with
HDMI output. Also, the HDMI
IN 3 terminal outputs audio
by connecting it to an ARC-
compatible device.
9 USB:
USB Terminal
Connect the USB memory to use
“USB media player” or “Memory
viewer”. Also, this can be used
to supply power of up to 5 V/
max 1 A to an external device
when the picture is displayed.
10 USB-C HOST:
USB-C terminal
Connect a PC or video equipment
that has a USB-C terminal. Also,
this can be used to supply power
of up to 60 W to an external
device when the picture is
displayed.
11
USB DEVICE
:
USB terminal
USB communication with devices
connected to the USB-C HOST
terminal is possible. Also, when
the USB memory is connected,
the “USB media player” or
“Memory viewer” function can be
used. Also, this can be used to
supply power of up to 5 V/max 2
A to an external device when the
picture is displayed.
12
13
IR IN:
IR OUT:
Infrared Signal Input / Output
Terminal
Use this when operating more
than one display with one remote
control.
14 SENSOR IN:
Sensor Terminal
Connect the supplied sensor
module.
(see page 14)
15 SLOT:
Expansion slot
(see page 15)
Note
●
For the compatible function board, consult the dealer
where you purchased the product.
SQ2H series
