Panasonic TH-65PZ750U, Service Manual

Page: 22 / 193

6.43. Remove the squawker speaker
1. Remove the cabinet assy. (See section 6.42.)
2. Disconnect the relay connectors.
3. Remove the screws (×18 ).
4. Remove the glass holders (left, right).
5. Remove the screws (×2 ).
6. Remove the squawker speaker.
6.44. Replace the plasma panel
(finished)
1. Place the new plasma panel (finished) on the flat surface of
the table (covered by a soft cloth), with the plasma panel
surface facing downward.
2. Attach the C1, C2, C3,C4,C5-Board and the C6-Board,
connect the flexible cables (×30) from the Plasma panel to
the C1, C2, C3,C4,C5-Board and the C6-Board, and fit the
flexible cable holders.
3. Attach the Hooks (left, right) and fit the Reinforcement
Angles (L, R) and the Connection Plate (A, B, C, D) to the
new plasma panel.
4. Place the plasma panel section on the servicing stand.
5. Attach the cabinet assy and each P.C.Board and so on, to
the new plasma panel.
* When fitting the cabinet assy, be careful not to allow
any debris, dust or handling residue to remain between
the front glass and plasma panel.
22
TH-65PZ750U