Panasonic TH-65PF20T, Service Manual, Page: 17 / 149

17
TH-65PF20W / TH-65PF20T
7 Troubleshooting Guide
7.1. Self Check
7.1.1. Display Indication
1. Self-check is used to automatically check the bus line
controlled circuit of the Plasma display.
2. To get into the Self-check mode, press the volume down
button on the customer controls at the bottom of the set,
at the same time pressing the
OFF-TIMER button on the
remote control, and the screen will show.
If the IIC ports have been checked and found to be incorrect
Or not located then [ - - ] will appear in place of [ OK ]
[ 01 ] in the line of the [ PTCT ] means the number of blinks of
the Power LED is 1. (Reference to 7.1.2)
[ H09 ] in the line of the [ PTCT ] is the error code.
To exit the CAT mode switch off the main power.
Note:
The line of the [ PTCT ] displays when you get into the Self-
check mode for the first time only after the Power LED
blinks.