Panasonic TH-65C300K, Service Manual

Page: 9 / 39

TH-65C300K/TH-65C300M/TH-65C300T
9
5 - Reset Shop submenu
GREEN Offset 000..255 Set G Offset by pressing
“
fg
” key (-127..+128 for
offset)
BLUE Offset 000..255 Set B Offset by pressing
“
fg
” key (-127..+128 for
offset)
White Balance Init > Press “
g
” key to initialize
RGB
Gain/Offset values
Pic. Enhance On/Off Press “
g
” key to disable
all picture settings from
Feature submenu. This
should be done before
any White Balance
alignment (flag is restored
to Off after Shop-End)
Picture Related > Press “
g
” key to activate
submenu
Picture
Related Flesh tone On/Off Press “
fg
” key to enable/
disable
Adaptive Luma Control On/Off Press “
fg
” key to enable/
disable
Light Sensor On/Off Press “
fg
” key to enable/
disable
Dynamic Backlight Low
Medium
High
Auto Select by pressing “
fg
”
key
Back light 000..100 Set Backlight by pressing
“
fg
” key
ADP Control Low Point 000..100 (007d) Set ADP Low by pressing
“
fg
” key
ADP Control Middle Point 000..100 (057d) Set ADP id by pressing
“
fg
” key
ADP Control High Point 000..100 (100d) Set ADP High by pressing
“
fg
” key
Scaling Brightness 000..255 Set ScBrigh by pressing
“
fg
” key (-127..+128 for
offset)
Scaling Contrast 000..255 Set ScCont by pressing
“
fg
” key (-127..+128 for
offset)
Scaling Saturation 000..255 Set ScSat by pressing
“
fg
” key (-127..+128 for
offset)
Item Sub-item Value Note
Item Sub-item Value Note
Reset
Shop > Press “ OK
g
” key to
remove Factory presets
(channel Maps, bargraph
context, …) and restore
User OOB settings. All
adjustments are not
impacted!