Panasonic TH-58PY700P, Service Manual

Page: 18 / 199

6.25. Remove the stand brackets
and rear mounting metals
1. Remove the plasma panel section from the servicing stand
and lay on a flat surface such as a table (covered) with the
plasma panel surface facing downward.
2. Remove the stand brackets (left, right) fastening screw (×
1each).
3. Remove the rear mounting metals (left, right) fastening
screws (×4 each).
4. Remove the stand brackets and rear mounting metals.
5. Remove the fastening screws (×4 each).
6. Remove the stand brackets from rear mounting metals.
6.26. Remove the front bracket
1. Unlock the cable clampers to free the cable.
2. Remove the screws (×3 ) and remove the front bracket.
6.27. Remove the G-Board and GH-
Board
1. Remove the front bracket. (See section 6.26.)
2. Remove the screws (×4 ) and remove the front shield
case (front).
3. Remove the screws (×4 ) and disconnect the connector
(G51, G52 and GH11).
4. Remove the G-Board and GH-Board.
6.28. Remove the GS-Board
1. Remove the stand bracket right and rear mounting metal
right. (See section 6.25.)
2. Unlock the cable clampers to free the cable.
3. Remove the screws (×2 ).
4. Remove the SD card unit.
5. Disconnect the connector (GS09 and GS52).
6. Remove the screw (×1 ).
7. Remove the GS-Board.
18
TH-58PZ700B / TH-58PZ700E / TH-58PY700F / TH-58PY700P