Panasonic TH-50PX720B, Operating Instructions Manual

Page: 20 / 28

38
Advanced
39
INPUT
OPTION SD CARD
EXIT
RETURN
Filename
Date
Pixel
100-0001
1/17
10/23/2006
1600 x 1200
100-0004 100-0003 100-0002 100-0001
100-0008 100-0007 100-0006 100-0005
100-0012 100-0011 100-0010 100-0009
Photo View Mode
Select
Reading
View EXIT
Select
RETURN
MENU
Slide show
Signal output from all AV terminals will
be disabled during SD card view.
Press OK to proceed.
Press EXIT to return to TV viewing.
Prev
Rotate
Rotate
Select
Slide show
Single view
EXIT
List MENU
■
Slide show
red
•
For details,
see p. 39
Viewing from card
The still images recorded by the digital camera will be displayed.
View
4
Insert the SD Card
•
Warning message for output signal is displayed.
Select the photo to be viewed 3
Displayed one at a time
To previous photo
Rotate 90 ˚ (anti-clockwise)
To next photo
1
2
Enter SD mode (Photo View Mode)
select
view
Rotate 90 ˚
(clockwise)
Operation
guide
(Thumbnail screen)
Caution
•
During the operation, no signals are output from the monitor output terminals.
•
“Date” shows the date on which the recording was made by the digital camera.
It shows “**/**/****” when recordings are made without date signal.
■
To return to
thumbnail screen
RETURN
■
To return to TV
EXIT
or
SD CARD
SD
Card
(Photos)
•
V
iewing from card (Photos)
Error display
(images that could not be loaded, etc.)
Selected
photo
■
To display the operation guide or
OPTION
Cautions in handling SD Card
•
Do not remove the card while the TV is accessing data (this can damage card or TV).
•
Do not touch the pins on the back of the card.
•
Do not subject the card to a high pressure or impact.
•
Insert the card in the correct direction (otherwise, card may be damaged).
•
Electrical interference, static electricity, or erroneous operation may damage the data or card.
•
Back up the recorded data at regular intervals in case of deteriorated or damaged data or erratic operation of the
TV. (Panasonic is not liable for any deterioration or damage of recorded data.)
Selected photo
information is displayed
Interval 5 seconds
Repeat Off
Viewing Setup
Main Menu
Picture
Viewing Setup
red
■
Start Slide show (operate in step
or
)
■
Slide show settings (operate in step
or
)
Slide show
Select the photo for the first view Start Slide show
Display the
menu
Select “Viewing setup” Select the functions and set
access
•
“Picture Menu” (p. 22)
Menu Item Adjustments / Configurations (alternatives)
Viewing
Setup
Interval Select slide show interval (5 / 10 / 15 / 30 / 60 / 90 / 120 seconds)
Repeat Slide show repeat (Off / On)
set
select
•
To pause
On screen messages
No valid file to play
•
The card has no data.
Cannot read file
•
The file is broken or unreadable.
•
The TV does not support the format.
(For the applicable formats and data, see p. 48.)
Is SD Card in?
•
Insert a SD card.
Message Meaning / Action
select
•
For details on SD Cards (p. 48)
Label surface
■
To open
Open the cover
Push until a
click is heard
■
To remove
■
To insert
Press the centre of the card
Blue LED
Note
•
Blue LED lights while SD Card is inserted if set “SD Card LED” to “On” in Setup Menu (p. 23).