Panasonic TH-50PB2U Operating Instructions Manual Download Page 41

Page: 41 / 66

EXPRESS SETTINGS

CUSTOM SETTINGS

RESET

EXTENDED LIFE SETTINGS

PICTURE MENU
PICTURE

EXTENDED LIFE SETTINGS

DYNAMIC

SIDE BAR ADJUST
NANODRIFT SAVER

LOCK SETTINGS

PEAK LIMIT

BRIGHT

HIGH MID

NANODRIFT MODE

SMOOTH

UNLOCK

APPLY TO CURRENT INPUT

APPLY TO ALL INPUTS

OFF

RECOMMENDED SETTINGS

EXTENDED LIFE SETTINGS

SIDE BAR ADJUST

Do not display a picture in 4:3 mode for an extended period,
as this can cause an image retention to remain on the side
bars on either side of the display

eld.

To reduce the risk of such an image retention, illuminate the
side bars.

This function may be applicable to the non-picture area.

OFF:

Darken both ends.

DARK:

Make it dark gray.

MID:

Make it gray.

BRIGHT:

Make it light gray.

Notes:

• To reduce the occurrence of image retention, set the SIDE BAR ADJUST to BRIGHT.
• The side bar may

ash (alternate black/white) depending on the picture being shown on the screen. Using Cinema mode

will reduce such

ashing.

side bars

4:3 mode

image

retention

Reduces screen image retention

The following settings are setup to reduce image retention:

Select “EXTENDED LIFE SETTINGS” in “SETUP” menu and press

button.

Image Retention Reduction Menu

“EXTENDED LIFE SETTINGS” enables you to set the following 5 menus (Image Retention Reduction Menu) as
recommended values or set them individually.

PICTURE MENU
PICTURE

“PICTURE MENU” and “PICTURE” are same as “PICTURE” menu items (see page 27). The settings of this menu will be
re

ected to the “PICTURE” menu.

Set to the recommended value
Set individually
Reset to the factory settings

Image Retention Reduction Menu

Summary of Contents for TH-50PB2U



































































Search results

Summary of Contents for TH-50PB2U

Reviews:

Related manuals for TH-50PB2U

Brands by name

Popular brands

Panasonic TH-50PB2U, Operating Instructions Manual

Search results

Summary of Contents for TH-50PB2U

Reviews:

Related manuals for TH-50PB2U

Brands by name

Popular brands