manualshive.com logo in svg

Panasonic TH-50LFC70E, Operating Instructions Manual, Page: 27 / 80

Share
Download
Panasonic TH-50LFC70E Operating Instructions Manual Download Page 27

25

ASPECT Controls

The Display will allow you to enjoy viewing the picture at its maximum size, including wide screen cinema format 
picture.

For HD signal input [1125 (1080) / 60i • 50i • 60p • 50p • 24p • 25p • 30p • 24psF, 1250 (1080) / 50i, 750 (720) / 60p • 50p]:

4:3 Full

Zoom1

14:9

Just

Zoom2

Zoom3

4:3

16:9

[from the unit]

Press repeatedly to move through the aspect options:
For details about the aspect mode, please see “List of Aspect Modes” (page 69).

Note: 

Be aware that if you put the display in a public place for commercial purposes or a public showing 
and then use the aspect mode select function to shrink or expand the picture, you may be violating 
the copyright under copyright law. It is prohibited to show or alter the copyrighted materials of other 
people for commercial purposes without the prior permission of the copyright holder.

4:3

Zoom

16:9

For PC signal input:

For SD signal input (525 (480) / 60i • 60p, 625 (575) / 50i • 50p):

4:3

Zoom1

16:9

Zoom2

Zoom3

14:9

Just

Notes:

•  The aspect mode is memorized separately for each input terminal.
•  Do not allow the picture to be displayed in 4:3 mode for an extended period, as this can cause a permanent image 

retention to remain on the Display Panel.

All Aspect mode

Set “All Aspect” to “On” in Options menu to enable the extended aspect mode (page 60). When All Aspect mode, the aspect 
mode of pictures is switched as follows. For details about the aspect mode, please see “List of Aspect Modes”. (page 69)

For VIDEO (S VIDEO) signal input:

For SD signal input (525 (480) / 60i • 60p, 625 (575) / 50i • 50p):

4:3

Zoom

16:9

For PC signal input:

For HD signal input [1125 (1080) / 60i • 50i • 60p • 50p • 24p • 25p • 30p • 24psF, 1250 (1080) / 50i, 750 (720) / 60p • 50p]:

4:3

Zoom1

16:9

Just

Zoom2

Zoom3

14:9

4:3 Full

Zoom1

16:9

Just1

Zoom2

Zoom3

14:9

Just2

4:3 (1)

4:3 (2)

4:3

Zoom1

16:9

Zoom2

Zoom3

14:9

Just

4:3

Zoom1

16:9

Zoom2

Zoom3

14:9

Just

For VIDEO (S VIDEO) signal input:

With the following inputs, the aspect will be  xed to “16:9” and you cannot switch it.
Miracast(TM), MEMORY VIEWER

ENTER/

The aspect mode changes each time the ENTER button is pressed.

4:3

H-FILL

ZOOM

FULL

JUST

4:3

ZOOM

FULL

4:3

ZOOM

JUST

FULL

For VIDEO (S VIDEO) signal input:

4:3

ZOOM

JUST

FULL

For PC signal input:

For SD signal input (525 (480) / 60i • 60p, 625 (575) / 50i • 50p):

For HD signal input [1125 (1080) / 60i • 50i • 60p • 50p • 24p • 25p • 30p • 24psF, 1250 (1080) / 50i, 750 (720) / 60p • 50p]:

With the following inputs, the aspect will be  xed to “FULL” and you cannot switch it.
Miracast(TM), MEMORY VIEWER

[TH-50LFC70U, TH-65LFC70U, TH-80LFC70U]

[TH-50LFC70E, TH-65LFC70E, TH-80LFC70E, TH-50LFC70W, TH-65LFC70W, TH-80LFC70W]

Summary of Contents for TH-50LFC70E

















































































Reviews:

No comments