Panasonic TH-50CX740A, Ehelp

Page: 94 / 330

3D Eyewear - Registration
■
First registration
Perform the first registration when the 3D Eyewear is used for the first time.
1. Turn the TV on.
2. Press Power button for approx. 1 second to turn the 3D Eyewear on.
●
The lamp lights for approx. 2 seconds and then flashes.
●
The 3D Eyewear is turned on and the registration starts.
●
Place the 3D Eyewear within 50 cm from the TV while registration is in
progress.
3. Once the registration is successfully completed, the 3D Eyewear will
reconnect to TV automatically when the 3D Eyewear is turned on near the
TV in 3D mode.
■
Registration again
When connection with the registered TV fails, or when using with another TV,
re-register the 3D Eyewear.
1. Turn the TV on.
2. Within 50 cm from the TV, press the Power button until the lamp lights,
then release it to start registration.
3. Once the registration is successfully completed, the 3D Eyewear will
reconnect to TV automatically when the 3D Eyewear is turned on near the
TV in 3D mode.
= Note =
●
If the registration fails, the 3D Eyewear will be turned off. In this case, turn
the TV off and perform from step 1.
- 94 -