23
English
Select the language
Select [Home]
Select [Home] for use in a home viewing environment.
≥
[Shop] is for shop display.
≥
To change the viewing environment later on, the set
will need to have all settings initialised by accessing
[Shipping Condition].
Set up the network connection
Tick the TV signal mode to tune, and then select
[Start Auto Tuning]
Select your region (Satellite)
If tuning has failed check the Satellite cable, RF cable,
and the network connection, and then follow the on-
screen instructions.
≥
The TV goes into Standby mode when no signal is
received and no operation is performed for 10 minutes
if [No signal Power off] in the Timer menu is set to [On]
(factory setting).
≥
To retune all channels
[Auto Tuning] in [Tuning Menu] ([Setup] menu)
≥
If no satellite channel is found, set [LNB Band
Frequency] to suit your environment.
[LNB Configuration] in [Satellite TV Tuning
Menu] ([Setup] menu)
≥
To add the available TV signal mode later
[Add TV Signal] in [Tuning Menu] ([Setup]
menu)
≥
To initialise all settings
[Shipping Condition] in [System Menu] ([Setup]
menu)
Watching TV
1
Turn power on
or
2
Select the mode
≥
Selectable modes vary depending on the stored
channels.
3
Select a channel
or
≥
To select a channel position with 2 or more-digit, e.g.
399
Auto Tuning is now complete and the
TV is ready for viewing.
Note
(TV)
(Remote Control)
≥
Mains power On / Off switch should be on.
(p. 21)
up
down
TH-48_55_65LZ980Z_Eng_TQB4GA0057.book 23 ページ ２０２２年４月２６日 火曜日 午後２時３１分
