6
(eARC)
9
Connecting the TV
Connecting the TV
●
Please ensure the TV is disconnected from the
mains socket/ power point before attaching or
disconnecting any RF/ AV leads.
●
External equipment and cables are for illustrative
purposes only and not supplied with this TV.
●
Check the type of terminals and cable plugs are
correct when connecting.
●
When using an HDMI cable, use the fully wired one.
●
Keep the TV away from electronic equipment (video
equipment, etc.) or equipment with an infrared
sensor. Otherwise, distortion of image/ sound may
occur or operation of other equipment may be
interfered.
●
Also read the manual of the equipment being
connected.
Terminals
Rear of the TV
7
8
9
5
2
3
USB 3.0
1 USB 2.0
4
ETHERNET
5
HDMI 2
6
7
9
10
DIGITAL AUDIO OUT
HDMI 1(eARC)
HEADPHONE
AV IN
ANTENNA
6
3
4
2
1
●
Keep RF (aerial) cable away from the mains lead to
avoid and minimise mains interference pickup.
●
Do not place the RF cable under the TV.
●
An aerial, correct cable (75
Ω
coaxial) and correct
terminating plug are required to obtain optimum quality
picture and sound.
●
If a communal aerial system is used, you may require
the correct connection cable and plug between the wall
aerial socket and the TV.
●
Your local Television Service Centre or dealer may be
able to assist you in obtaining the correct aerial system
for your particular area and the accessories required.
●
Any matters regarding aerial installation, upgrading
of existing systems or accessories required, and
the costs incurred, are the responsibility of you, the
customer.
●
If the aerial is placed in the wrong location, interference
might happen.
Connections
Aerial
RF cable
Aerial
ANT
●
When optional accessories such as wall brackets etc.
are used, always read and follow the manufacturer
installation and usage instructions.
●
Do not mount the unit directly below ceiling lights
(such as spotlights or halogen lights) which typically
give off high heat. Doing so may warp or damage
plastic cabinet parts.
●
When installing wall brackets you must ensure the
wall bracket is not electrically grounded to metal wall
studs. Always ensure that there are no electrical
cables, pipes etc. in the wall before you begin the
wall bracket installation.
●
To prevent fall and injury, remove the TV from its
fixed wall position when it is no longer in use.
Warning
HDMI 3
8
10
